The main body of the medical air sterilizer is made of completely non-combustible metal material and is made of modern moisture-proof technology. The surface decoration layer is made of crystal panel, which is fashionable and novel. It has the characteristics of not hiding dirt, reducing secondary infection, easy to clean, convenient for daily cleaning, maintenance, maintenance, time-saving and labor-saving.

There are usually two types of air disinfection methods for medical air disinfection machines, namely static disinfection and dynamic disinfection. in:

1. Static disinfection:

1) Vinegar disinfection method: Vinegar contains acetic acid and other ingredients, which has a certain bactericidal ability and is often used for indoor air disinfection. For a room of about 10 square meters, 100-150 grams of vinegar can be used, add 2 times of water, put it in a porcelain bowl and slowly steam it with slow fire. When fumigating, close the doors and windows.

2) Disinfection by spray method: Use mechanical or chemical aerosols to spray 84 disinfectant in the air, and rely on aerosols suspended in the air to purify or disinfect the air. The flow rate can reach 300mL per minute, and the spray distance can reach up to 8m. It is easy to operate, and can spray and disinfect objects and fabric surfaces from various angles at will.

3) UV lamp disinfection: divided into fixed irradiation and mobile irradiation. The installation height is about 2.5m from the ground, and the irradiation time needs 60~120min, which has a good disinfection effect. Beware of irradiating human eyes) skin.

4) Ozone generator disinfection: divided into micro, that is, with low ozone generation, used for sanitation and cleanliness) or disinfection of small spaces; large, even with large ozone generation, used for indoor air disinfection. Under the condition of relative humidity ≥70%, the ozone concentration is 4~6mg/m³, and the working time is 60min, which can meet the disinfection requirements. Ozone has a corrosive effect on metals, accelerates aging on rubber) and plastics, and is toxic to humans. People must leave the room during disinfection. After disinfection, the room can not enter the room until the smell of ozone cannot be smelled.

2. Dynamic disinfection:

1) Air dynamic disinfection machine: an independent air purification and disinfection device, which has various forms such as cabinet type, wall-mounted type, ceiling type and so on. A dynamic air sterilizer with an air volume of 2000m³/h can be turned on for 60 minutes in a room of 200m³, which can meet the disinfection requirements. This sterilizer itself is non-toxic and harmless, can be used continuously under the condition of people, and also has the function of dust removal and harmful gas removal.

2) Green grass traditional Chinese medicine disinfectant: divided into spray, hot steam. The above-mentioned Chinese herbal medicines are extracted, the stock solution is diluted according to 75% concentration, and 30ml is sprayed into the air according to 60m³, and the effect can be achieved once in the morning and once in the evening.

3) Plasma diffused deodorization technology: The plasma is diffused into the air to decompose gaseous pollutants, harmful bacteria, viruses, etc. in the air, and the effect on odor treatment is also very obvious.

The medical air sterilizer is the model with the largest installed capacity in the operating room. It does not take up space. It has both dynamic and static functions. It can be sterilized even if there is no one. The disinfection effect is good, and it is deeply loved by users.